ZEROING / TARE

ZEROING / TARE
You can press the [Tare] key to set a new zero point and show the zero reading if
the weight reading is less than 4% of the total of the maximum capacity of the scale.
This may be necessary if the weight is not reading zero with nothing on the
platform. The zero indicators will light up: >0<.
If you are using a container to weigh then you can place this on the platform and
press the [Tare] key, providing the container weight is more than 4% of the
maximum capacity of the scale, the display will show zero and tare indicator will
light up. You can then weigh your object in the container. Taring weight subtracts
from the total scale capacity