Free-Delivery Split Heat Pump (FDSHP), Packaged Terminal Heat Pump (PTHP), Self Contained Through-The-Wall Heat Pump (SCTTWHP), and Window Heat Pump (WHP) Inspection Procedures Inspect FDSHP, PTHP, SCTTWHP, and WHP equipment and duct system(s) for adherence to Standards. The preceding inspection procedures shall apply to all FDSHP, PTHP, SCTTWHP, and WHP systems except as follows:
1) See Standards for certain sections that do not apply.
2) Air flow shall be as recommended by the manufacturer. (Major)
3) Check to see if integral auxiliary electric heat is provided by the manufacturer within the unit cabinet or fan coil section as part of the heat pump. (Major)
4) Verify that any integral auxiliary heaters are controlled by the heat pump's indoor thermostat. (Major)
5) Verify that installing Quality Heat Pump Contractor has met manufacturer's instructions for the complete installation of the system, including any recommended parts and accessories and any necessary wall/window case. (Major)
6) Inspect the joint around the unit's case (between the case and wall or window) to assure weathertight seal with caulk, seals, or gaskets, as provided by the manufacturer. (Major)
Inga kommentarer:
Skicka en kommentar